MDPE Tee 20mm - 1/2" BSPM - 20mm
MDPE Tee Compression Fitting, 20mm to 1/2" BSP Male, offers a simple, reliable way to branch a 20mm MDPE water line. Designed for tradespeople and builders, it suits domestic water supply, irrigation, and light industrial piping where a 90-degree branch is required. This MDPE compression tee splits flow from a 20mm MDPE line to a 1/2" BSP Male outlet. The 90-degree angle lets you create a clean branch without changing the main run, helping to keep installations efficient on-site. With a PN10 pressure rating, the fitting is suitable for systems up to 10 bar (approximately 1 MPa or 145 psi), aligning with typical domestic and irrigation requirements. Key features and benefits:
- PN10 rated: handles up to 10 bar, giving you a clear specification for pressure allowance in water supply and irrigation runs.
- MDPE material: offers resistance to corrosion from chemicals and other substances found in residential and industrial environments, helping extend pipe life.
- Leak-free joints when properly installed: the compression connection is designed to seal without leaks when tightened to the correct specification.
- Durability: MDPE fittings are noted for long service life and the ability to withstand temperature variations and mechanical stress.
- Versatility: suitable for water supply, irrigation, and various fluid transport applications within MDPE systems.
- Cost-effective and easy to install: designed to provide a straightforward, tool-friendly connection that doesn’t require specialist equipment. Practical considerations:
- Ensure the 20mm MDPE pipe is clean and undamaged, and that the 1/2" BSP Male thread on the branch is clean and compatible with your downstream fittings.
- The fitting is intended for PN10-rated MDPE systems, so confirm your network’s pressure requirements before installation.
- For reliable performance, follow standard on-site practices for MDPE compression fittings to achieve a true, leak-free joint. In summary, this MDPE Tee Compression Fitting combines a durable MDPE body with a 20mm to 1/2" BSP male branch, delivering a practical, reliable solution for branching MDPE water lines in homes, gardens, and light industrial setups.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
MDPE Tee 20mm - 1/2" BSPM - 20mm
MDPE Tee 20mm - 1/2" BSPM - 20mm
MDPE Tee Compression Fitting, 20mm to 1/2" BSP Male, offers a simple, reliable way to branch a 20mm MDPE water line. Designed for tradespeople and builders, it suits domestic water supply, irrigation, and light industrial piping where a 90-degree branch is required. This MDPE compression tee splits flow from a 20mm MDPE line to a 1/2" BSP Male outlet. The 90-degree angle lets you create a clean branch without changing the main run, helping to keep installations efficient on-site. With a PN10 pressure rating, the fitting is suitable for systems up to 10 bar (approximately 1 MPa or 145 psi), aligning with typical domestic and irrigation requirements. Key features and benefits:
- PN10 rated: handles up to 10 bar, giving you a clear specification for pressure allowance in water supply and irrigation runs.
- MDPE material: offers resistance to corrosion from chemicals and other substances found in residential and industrial environments, helping extend pipe life.
- Leak-free joints when properly installed: the compression connection is designed to seal without leaks when tightened to the correct specification.
- Durability: MDPE fittings are noted for long service life and the ability to withstand temperature variations and mechanical stress.
- Versatility: suitable for water supply, irrigation, and various fluid transport applications within MDPE systems.
- Cost-effective and easy to install: designed to provide a straightforward, tool-friendly connection that doesn’t require specialist equipment. Practical considerations:
- Ensure the 20mm MDPE pipe is clean and undamaged, and that the 1/2" BSP Male thread on the branch is clean and compatible with your downstream fittings.
- The fitting is intended for PN10-rated MDPE systems, so confirm your network’s pressure requirements before installation.
- For reliable performance, follow standard on-site practices for MDPE compression fittings to achieve a true, leak-free joint. In summary, this MDPE Tee Compression Fitting combines a durable MDPE body with a 20mm to 1/2" BSP male branch, delivering a practical, reliable solution for branching MDPE water lines in homes, gardens, and light industrial setups.
$0.93
Original: $2.67
-65%MDPE Tee 20mm - 1/2" BSPM - 20mm—
$2.67
$0.93Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
MDPE Tee Compression Fitting, 20mm to 1/2" BSP Male, offers a simple, reliable way to branch a 20mm MDPE water line. Designed for tradespeople and builders, it suits domestic water supply, irrigation, and light industrial piping where a 90-degree branch is required. This MDPE compression tee splits flow from a 20mm MDPE line to a 1/2" BSP Male outlet. The 90-degree angle lets you create a clean branch without changing the main run, helping to keep installations efficient on-site. With a PN10 pressure rating, the fitting is suitable for systems up to 10 bar (approximately 1 MPa or 145 psi), aligning with typical domestic and irrigation requirements. Key features and benefits:
- PN10 rated: handles up to 10 bar, giving you a clear specification for pressure allowance in water supply and irrigation runs.
- MDPE material: offers resistance to corrosion from chemicals and other substances found in residential and industrial environments, helping extend pipe life.
- Leak-free joints when properly installed: the compression connection is designed to seal without leaks when tightened to the correct specification.
- Durability: MDPE fittings are noted for long service life and the ability to withstand temperature variations and mechanical stress.
- Versatility: suitable for water supply, irrigation, and various fluid transport applications within MDPE systems.
- Cost-effective and easy to install: designed to provide a straightforward, tool-friendly connection that doesn’t require specialist equipment. Practical considerations:
- Ensure the 20mm MDPE pipe is clean and undamaged, and that the 1/2" BSP Male thread on the branch is clean and compatible with your downstream fittings.
- The fitting is intended for PN10-rated MDPE systems, so confirm your network’s pressure requirements before installation.
- For reliable performance, follow standard on-site practices for MDPE compression fittings to achieve a true, leak-free joint. In summary, this MDPE Tee Compression Fitting combines a durable MDPE body with a 20mm to 1/2" BSP male branch, delivering a practical, reliable solution for branching MDPE water lines in homes, gardens, and light industrial setups.
