Wall Flange Kit 20mm MDPE + Bib Nickle Tap 1/2" Barb
Wall Flange Kit 20mm MDPE + Bib Nickel Tap 1/2" Barb is a compact, ready-to-fit solution for outdoor water supply and garden irrigation. It combines a 20mm MDPE wall flange with a 1/2" BSP female connection and a nickel-plated brass garden bib tap, plus a 1/2" hose barb outlet. Included in the kit
- MDPE Wall Flange 20mm – 1/2" BSPF (MDPEWF20-12BSPF)
- Brass Nickel Plated Tap 1/2" BSPM
- 1/2" Barb Outlet (GTBIB12B001CH) Key technical details and benefits
- MDPE PN10 fittings rated to 10 bar (about 145 psi), suitable for typical domestic and light industrial water supplies.
- MDPE fittings provide chemical resistance and flexibility, making them a reliable choice for outdoor piping and irrigation. The wall flange compresses onto the pipe to create a secure, leak-tight connection to a flat surface.
- The kit uses a 1/2" BSP male thread on the tap and a 1/2" BSP female on the wall flange, allowing straightforward assembly without special equipment. The 1/2" hose barb outlet enables a secure connection to standard garden hoses.
- The tap is brass with a nickel-plated finish, offering corrosion resistance and durability for prolonged outdoor use. The turn handle gives intuitive on/off control, while the hose barb design helps minimise leaks at the hose connection.
- Not included: PTFE tape. If you use threading tape, factor in separate purchase to ensure a proper seal. Common uses and practical considerations
- Ideal for outdoor watering setups, lawn care, garden tubs, and external taps where a wall-mounted supply is preferred.
- Suitable for installations where MDPE piping runs to a wall-mounted outlet, providing a neat, serviceable water point with a controlled outlet via a 1/2" hose connection.
- A practical choice for tradespeople, landscapers, and DIY garden installers seeking a single, integrated kit rather than multiple separate components.
- When installing, ensure the MDPE pipe ends are clean and square, tighten the compression connection firmly, and check for leaks after the first run. This kit offers a durable, straightforward solution for outdoor water distribution, with components chosen to resist weather and chemical exposure while delivering reliable hose-ready flow.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Wall Flange Kit 20mm MDPE + Bib Nickle Tap 1/2" Barb
Wall Flange Kit 20mm MDPE + Bib Nickle Tap 1/2" Barb
Wall Flange Kit 20mm MDPE + Bib Nickel Tap 1/2" Barb is a compact, ready-to-fit solution for outdoor water supply and garden irrigation. It combines a 20mm MDPE wall flange with a 1/2" BSP female connection and a nickel-plated brass garden bib tap, plus a 1/2" hose barb outlet. Included in the kit
- MDPE Wall Flange 20mm – 1/2" BSPF (MDPEWF20-12BSPF)
- Brass Nickel Plated Tap 1/2" BSPM
- 1/2" Barb Outlet (GTBIB12B001CH) Key technical details and benefits
- MDPE PN10 fittings rated to 10 bar (about 145 psi), suitable for typical domestic and light industrial water supplies.
- MDPE fittings provide chemical resistance and flexibility, making them a reliable choice for outdoor piping and irrigation. The wall flange compresses onto the pipe to create a secure, leak-tight connection to a flat surface.
- The kit uses a 1/2" BSP male thread on the tap and a 1/2" BSP female on the wall flange, allowing straightforward assembly without special equipment. The 1/2" hose barb outlet enables a secure connection to standard garden hoses.
- The tap is brass with a nickel-plated finish, offering corrosion resistance and durability for prolonged outdoor use. The turn handle gives intuitive on/off control, while the hose barb design helps minimise leaks at the hose connection.
- Not included: PTFE tape. If you use threading tape, factor in separate purchase to ensure a proper seal. Common uses and practical considerations
- Ideal for outdoor watering setups, lawn care, garden tubs, and external taps where a wall-mounted supply is preferred.
- Suitable for installations where MDPE piping runs to a wall-mounted outlet, providing a neat, serviceable water point with a controlled outlet via a 1/2" hose connection.
- A practical choice for tradespeople, landscapers, and DIY garden installers seeking a single, integrated kit rather than multiple separate components.
- When installing, ensure the MDPE pipe ends are clean and square, tighten the compression connection firmly, and check for leaks after the first run. This kit offers a durable, straightforward solution for outdoor water distribution, with components chosen to resist weather and chemical exposure while delivering reliable hose-ready flow.
$16.00
Wall Flange Kit 20mm MDPE + Bib Nickle Tap 1/2" Barb—
$16.00
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Wall Flange Kit 20mm MDPE + Bib Nickel Tap 1/2" Barb is a compact, ready-to-fit solution for outdoor water supply and garden irrigation. It combines a 20mm MDPE wall flange with a 1/2" BSP female connection and a nickel-plated brass garden bib tap, plus a 1/2" hose barb outlet. Included in the kit
- MDPE Wall Flange 20mm – 1/2" BSPF (MDPEWF20-12BSPF)
- Brass Nickel Plated Tap 1/2" BSPM
- 1/2" Barb Outlet (GTBIB12B001CH) Key technical details and benefits
- MDPE PN10 fittings rated to 10 bar (about 145 psi), suitable for typical domestic and light industrial water supplies.
- MDPE fittings provide chemical resistance and flexibility, making them a reliable choice for outdoor piping and irrigation. The wall flange compresses onto the pipe to create a secure, leak-tight connection to a flat surface.
- The kit uses a 1/2" BSP male thread on the tap and a 1/2" BSP female on the wall flange, allowing straightforward assembly without special equipment. The 1/2" hose barb outlet enables a secure connection to standard garden hoses.
- The tap is brass with a nickel-plated finish, offering corrosion resistance and durability for prolonged outdoor use. The turn handle gives intuitive on/off control, while the hose barb design helps minimise leaks at the hose connection.
- Not included: PTFE tape. If you use threading tape, factor in separate purchase to ensure a proper seal. Common uses and practical considerations
- Ideal for outdoor watering setups, lawn care, garden tubs, and external taps where a wall-mounted supply is preferred.
- Suitable for installations where MDPE piping runs to a wall-mounted outlet, providing a neat, serviceable water point with a controlled outlet via a 1/2" hose connection.
- A practical choice for tradespeople, landscapers, and DIY garden installers seeking a single, integrated kit rather than multiple separate components.
- When installing, ensure the MDPE pipe ends are clean and square, tighten the compression connection firmly, and check for leaks after the first run. This kit offers a durable, straightforward solution for outdoor water distribution, with components chosen to resist weather and chemical exposure while delivering reliable hose-ready flow.
