Wall Flange Kit 20mm MDPE - Lever Valve & 20mm MDPE Outlet
The WF20KIT033 MDPE Wall Flange Kit is a compact, reliable external connection for 20mm MDPE pipes, built for tradespeople and installers working on garden taps, irrigation lays, or service connections. It pairs a wall mountable flange with a lever control valve and a straight joiner for a straightforward, robust outlet feed. What’s in the kit and compatibility
- 1 x MDPE Wall Flange 20mm – ½" BSP (MDPEWF20-12BSPF)
- 1 x Lever Valve (BRVALVE12BSPM-F)
- 1 x MDPE Straight Joiner 20mm – ½" BSP (MDPESTR20-12BSPM)
These MDPE PN10 fittings are designed to withstand up to 10 bar (approximately 145 psi) and utilise threaded compression connections to deliver a tight seal without specialist equipment. The ½" BSP threads ensure standard compatibility with common MDPE pipework and outdoor outlets. Note: PTFE tape is not included with this kit and must be purchased separately if required for the specific installation. Key benefits and practical use
- Compression connections reduce the need for soldering or crimping, making installation quicker and less equipment-intensive for site teams.
- The nickel-plated brass lever valve offers durable on/off control with improved corrosion resistance, suitable for outdoor or damp environments.
- The wall flange provides a secure mounting point on flat surfaces, helping to position the external outlet cleanly and neatly.
- The straight joiner enables a direct, unobstructed run from the MDPE supply to the external outlet, minimising potential leak paths and simplifying routing. Scenarios where it shines
- Fitting an external garden tap or hose outlet from an internal MDPE network without altering existing pipework.
- Irrigation systems that require a controlled feed to an outdoor valve and outlet.
- Servicing or maintenance points on MDPE mains where a readily operable shut-off valve is beneficial. Installation notes and tips
- Ensure you are connecting 20mm MDPE pipe and that the corresponding BSP threads align with the kit components.
- Hand-tighten compression nuts first, then secure with a suitable spanner to avoid overtightening, which can damage fittings.
- If your environment requires a seal on BSP threads, PTFE tape can be used, but it is not supplied with this kit. This kit is a practical, durable choice for external MDPE connections, combining a robust wall flange, a reliable lever valve, and a straightforward straight joiner to streamline outdoor water supply work.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Wall Flange Kit 20mm MDPE - Lever Valve & 20mm MDPE Outlet
Wall Flange Kit 20mm MDPE - Lever Valve & 20mm MDPE Outlet
The WF20KIT033 MDPE Wall Flange Kit is a compact, reliable external connection for 20mm MDPE pipes, built for tradespeople and installers working on garden taps, irrigation lays, or service connections. It pairs a wall mountable flange with a lever control valve and a straight joiner for a straightforward, robust outlet feed. What’s in the kit and compatibility
- 1 x MDPE Wall Flange 20mm – ½" BSP (MDPEWF20-12BSPF)
- 1 x Lever Valve (BRVALVE12BSPM-F)
- 1 x MDPE Straight Joiner 20mm – ½" BSP (MDPESTR20-12BSPM)
These MDPE PN10 fittings are designed to withstand up to 10 bar (approximately 145 psi) and utilise threaded compression connections to deliver a tight seal without specialist equipment. The ½" BSP threads ensure standard compatibility with common MDPE pipework and outdoor outlets. Note: PTFE tape is not included with this kit and must be purchased separately if required for the specific installation. Key benefits and practical use
- Compression connections reduce the need for soldering or crimping, making installation quicker and less equipment-intensive for site teams.
- The nickel-plated brass lever valve offers durable on/off control with improved corrosion resistance, suitable for outdoor or damp environments.
- The wall flange provides a secure mounting point on flat surfaces, helping to position the external outlet cleanly and neatly.
- The straight joiner enables a direct, unobstructed run from the MDPE supply to the external outlet, minimising potential leak paths and simplifying routing. Scenarios where it shines
- Fitting an external garden tap or hose outlet from an internal MDPE network without altering existing pipework.
- Irrigation systems that require a controlled feed to an outdoor valve and outlet.
- Servicing or maintenance points on MDPE mains where a readily operable shut-off valve is beneficial. Installation notes and tips
- Ensure you are connecting 20mm MDPE pipe and that the corresponding BSP threads align with the kit components.
- Hand-tighten compression nuts first, then secure with a suitable spanner to avoid overtightening, which can damage fittings.
- If your environment requires a seal on BSP threads, PTFE tape can be used, but it is not supplied with this kit. This kit is a practical, durable choice for external MDPE connections, combining a robust wall flange, a reliable lever valve, and a straightforward straight joiner to streamline outdoor water supply work.
$12.00
Wall Flange Kit 20mm MDPE - Lever Valve & 20mm MDPE Outlet—
$12.00
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The WF20KIT033 MDPE Wall Flange Kit is a compact, reliable external connection for 20mm MDPE pipes, built for tradespeople and installers working on garden taps, irrigation lays, or service connections. It pairs a wall mountable flange with a lever control valve and a straight joiner for a straightforward, robust outlet feed. What’s in the kit and compatibility
- 1 x MDPE Wall Flange 20mm – ½" BSP (MDPEWF20-12BSPF)
- 1 x Lever Valve (BRVALVE12BSPM-F)
- 1 x MDPE Straight Joiner 20mm – ½" BSP (MDPESTR20-12BSPM)
These MDPE PN10 fittings are designed to withstand up to 10 bar (approximately 145 psi) and utilise threaded compression connections to deliver a tight seal without specialist equipment. The ½" BSP threads ensure standard compatibility with common MDPE pipework and outdoor outlets. Note: PTFE tape is not included with this kit and must be purchased separately if required for the specific installation. Key benefits and practical use
- Compression connections reduce the need for soldering or crimping, making installation quicker and less equipment-intensive for site teams.
- The nickel-plated brass lever valve offers durable on/off control with improved corrosion resistance, suitable for outdoor or damp environments.
- The wall flange provides a secure mounting point on flat surfaces, helping to position the external outlet cleanly and neatly.
- The straight joiner enables a direct, unobstructed run from the MDPE supply to the external outlet, minimising potential leak paths and simplifying routing. Scenarios where it shines
- Fitting an external garden tap or hose outlet from an internal MDPE network without altering existing pipework.
- Irrigation systems that require a controlled feed to an outdoor valve and outlet.
- Servicing or maintenance points on MDPE mains where a readily operable shut-off valve is beneficial. Installation notes and tips
- Ensure you are connecting 20mm MDPE pipe and that the corresponding BSP threads align with the kit components.
- Hand-tighten compression nuts first, then secure with a suitable spanner to avoid overtightening, which can damage fittings.
- If your environment requires a seal on BSP threads, PTFE tape can be used, but it is not supplied with this kit. This kit is a practical, durable choice for external MDPE connections, combining a robust wall flange, a reliable lever valve, and a straightforward straight joiner to streamline outdoor water supply work.
