Wall Flange Kit 25mm MDPE + Quick Connector Valve
The Wall Flange Kit 25mm MDPE + Quick Connector Valve is a compact, ready-to-install solution for delivering clean water access where MDPE pipe meets a wall. Designed for plumbers and installers, it combines reliable MDPE compression fittings with simple on-site connections and built-in flow control. Kit contents
- 1 x MDPE Wall Flange 25mm – ¾” BSP (MDPEWF25-34BSPF)
- 1 x Valve Connector ¾” BSP (VALVE34BSPMF001LIME)
- 1 x Click-Lock Quick Connect Fitting – ¾” BSP (TAPCON34BSPM001LIME) Key specifications and benefits
- MDPE PN10 rated: withstands up to 10 bar (approximately 145 psi) under standard conditions, suitable for typical domestic water and irrigation layouts.
- Compression connections: provide a tight, leak‑free seal without the need for specialised crimping tools or soldering, helping to reduce installation time on site.
- Wall flange design: anchors the pipe against a flat surface for a neat, tidy installation and flexible routing in confined spaces.
- Built-in flow control: the Tap Adapter with Valve (¾” BSPM) enables precise regulation of water flow at the point of use, aiding water management in irrigation or external taps.
- Quick connect outlet: the Male ¾” BSPM tap connector with click‑lock outlet accepts hoses and attachments quickly, reducing connection time and risk of accidental disconnections.
- Durable construction: MDPE fittings offer chemical resistance and good weather tolerance, contributing to longevity in outdoor or exposed installations.
- Lightweight, easy handling: components are designed for on-site assembly by tradespeople, with reliable performance in typical UK water systems. Usage scenarios
- Exterior wall taps for garden irrigation, allotments, and landscaping, where a flush, discrete water point is preferred.
- Small commercial or site installations needing a dependable connection from MDPE pipe to a fixed outlet with controlled flow.
- Temporary or semi-permanent water points where quick hose connections and straightforward maintenance are advantageous. installation notes
- This kit is not supplied with PTFE tape. If sealing requires PTFE tape, apply it to threads only as per standard fittings guidance.
- Ensure 25mm MDPE pipe fits the wall flange and that the ¾” BSP fittings align with the intended outlets.
- Check for any local codes or company standards governing external water connections and pressure limits.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Wall Flange Kit 25mm MDPE + Quick Connector Valve
Wall Flange Kit 25mm MDPE + Quick Connector Valve
The Wall Flange Kit 25mm MDPE + Quick Connector Valve is a compact, ready-to-install solution for delivering clean water access where MDPE pipe meets a wall. Designed for plumbers and installers, it combines reliable MDPE compression fittings with simple on-site connections and built-in flow control. Kit contents
- 1 x MDPE Wall Flange 25mm – ¾” BSP (MDPEWF25-34BSPF)
- 1 x Valve Connector ¾” BSP (VALVE34BSPMF001LIME)
- 1 x Click-Lock Quick Connect Fitting – ¾” BSP (TAPCON34BSPM001LIME) Key specifications and benefits
- MDPE PN10 rated: withstands up to 10 bar (approximately 145 psi) under standard conditions, suitable for typical domestic water and irrigation layouts.
- Compression connections: provide a tight, leak‑free seal without the need for specialised crimping tools or soldering, helping to reduce installation time on site.
- Wall flange design: anchors the pipe against a flat surface for a neat, tidy installation and flexible routing in confined spaces.
- Built-in flow control: the Tap Adapter with Valve (¾” BSPM) enables precise regulation of water flow at the point of use, aiding water management in irrigation or external taps.
- Quick connect outlet: the Male ¾” BSPM tap connector with click‑lock outlet accepts hoses and attachments quickly, reducing connection time and risk of accidental disconnections.
- Durable construction: MDPE fittings offer chemical resistance and good weather tolerance, contributing to longevity in outdoor or exposed installations.
- Lightweight, easy handling: components are designed for on-site assembly by tradespeople, with reliable performance in typical UK water systems. Usage scenarios
- Exterior wall taps for garden irrigation, allotments, and landscaping, where a flush, discrete water point is preferred.
- Small commercial or site installations needing a dependable connection from MDPE pipe to a fixed outlet with controlled flow.
- Temporary or semi-permanent water points where quick hose connections and straightforward maintenance are advantageous. installation notes
- This kit is not supplied with PTFE tape. If sealing requires PTFE tape, apply it to threads only as per standard fittings guidance.
- Ensure 25mm MDPE pipe fits the wall flange and that the ¾” BSP fittings align with the intended outlets.
- Check for any local codes or company standards governing external water connections and pressure limits.
$2.33
Original: $6.67
-65%Wall Flange Kit 25mm MDPE + Quick Connector Valve—
$6.67
$2.33Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Wall Flange Kit 25mm MDPE + Quick Connector Valve is a compact, ready-to-install solution for delivering clean water access where MDPE pipe meets a wall. Designed for plumbers and installers, it combines reliable MDPE compression fittings with simple on-site connections and built-in flow control. Kit contents
- 1 x MDPE Wall Flange 25mm – ¾” BSP (MDPEWF25-34BSPF)
- 1 x Valve Connector ¾” BSP (VALVE34BSPMF001LIME)
- 1 x Click-Lock Quick Connect Fitting – ¾” BSP (TAPCON34BSPM001LIME) Key specifications and benefits
- MDPE PN10 rated: withstands up to 10 bar (approximately 145 psi) under standard conditions, suitable for typical domestic water and irrigation layouts.
- Compression connections: provide a tight, leak‑free seal without the need for specialised crimping tools or soldering, helping to reduce installation time on site.
- Wall flange design: anchors the pipe against a flat surface for a neat, tidy installation and flexible routing in confined spaces.
- Built-in flow control: the Tap Adapter with Valve (¾” BSPM) enables precise regulation of water flow at the point of use, aiding water management in irrigation or external taps.
- Quick connect outlet: the Male ¾” BSPM tap connector with click‑lock outlet accepts hoses and attachments quickly, reducing connection time and risk of accidental disconnections.
- Durable construction: MDPE fittings offer chemical resistance and good weather tolerance, contributing to longevity in outdoor or exposed installations.
- Lightweight, easy handling: components are designed for on-site assembly by tradespeople, with reliable performance in typical UK water systems. Usage scenarios
- Exterior wall taps for garden irrigation, allotments, and landscaping, where a flush, discrete water point is preferred.
- Small commercial or site installations needing a dependable connection from MDPE pipe to a fixed outlet with controlled flow.
- Temporary or semi-permanent water points where quick hose connections and straightforward maintenance are advantageous. installation notes
- This kit is not supplied with PTFE tape. If sealing requires PTFE tape, apply it to threads only as per standard fittings guidance.
- Ensure 25mm MDPE pipe fits the wall flange and that the ¾” BSP fittings align with the intended outlets.
- Check for any local codes or company standards governing external water connections and pressure limits.
