A compact MDPE wall flange kit for 32mm pipework, bundled with a ¾" BSP lever valve and a 25mm MDPE straight connector—designed for quick, reliable water installations in homes and small trades projects. What’s in the kit - MDPE wall flange 32mm – ¾" BSP - Lever valve ¾" BSP (brass, nickel plated) with a smooth on/off lever - MDPE straight joiner 25mm to ¾" BSPM Key specs and benefits - MDPE PN10 fittings are rated to withstand up to 10 bar (approx. 145 psi), suitable for typical domestic mains and irrigation systems. - Compression connections provide a leak‑tight seal without specialist equipment, using standard MDPE fittings and tools. - Brass nickel‑plated lever valve offers durable operation and corrosion resistance, giving reliable flow control in both indoor and outdoor environments. - The 32mm wall flange enables secure pipe-to-wall mounting, improving system stability and reducing movement at the connection. - The 25mm MDPE straight connector enables a direct, straight run between two pipe sections, helping to keep layouts clean and measurable. Ideal uses and applications - Domestic water supply lines, outdoor taps, and irrigation sites where 32mm MDPE pipework is used. - Light commercial and small‑scale projects requiring a straightforward, mechanically joined connection with a controllable valve. - Environments where chemical resistance and corrosion protection are beneficial due to MDPE and brass nickel plating. Installation notes and practical tips - Ensure pipe ends are clean and cut square; deburr where necessary to achieve a smooth seal with compression fittings. - Align components before tightening to avoid cross‑threading; tighten per standard MDPE compression guidelines and do not overtighten. - This kit is not supplied with PTFE tape; if the thread seal requires tape, purchase PTFE tape separately and apply in the usual manner. - Inspect the lever valve and connections after initial commissioning for any signs of leakage; if present, re‑tighten gradually and recheck. Why this kit stands out - All-in-one solution for 32mm MDPE systems with a reliable control valve, reducing the number of separate purchases and simplifying on-site planning. - Durable materials (MDPE and brass with nickel finish) provide a balanced combination of strength, corrosion resistance, and longevity in typical UK water and irrigation scenarios.