Sandtex Brick Waterproof Protector Clear - 5 L
Information
This ready-to-use Brickwork Waterproofer and Protector, suitable for water-based applications, is designed to safeguard brickwork, render, pointing, and other porous surfaces. Brick and stone naturally absorb rainwater, which can lead to damage and crumbling in freezing conditions. This product dries quickly to create an invisible, water-repellent shield while still permitting surfaces to breathe. It is ideal for protecting pointing, render, stone, concrete, terracotta, and plaster surfaces.
- Preventing water damage to brickwork and stone
- Forming a water-repellent barrier
- Rapid drying time
- Allowing surfaces to breathe
Specifications
| Area | Exterior |
| Recommended Use | Brickwork, pointing, render, stone, concrete, terracotta, and plaster surfaces. |
| Base | Water-Based |
| Coverage | Up to 6m² per litre |
| Drying Time | 4-6 hours |
| Recommended Coats | 2 coats |
| Application Method | Brush or roller |
| Clean Up | Wash equipment with clean, cold water |
Preparation
Ensure all surfaces are thoroughly cleaned, dry, and free from any substances that could affect adhesion, such as loose or flaking material.
If there is any mould or fungal growth, treat the surface with a fungicidal wash and allow it to dry before applying the Brickwork Waterproofer & Protector. Repair any cracks or weak points in the pointing. Ideally, clean masonry should be stripped back to bare brick, mortar, or render to maximise the effectiveness of the treatment.
Application
It is recommended to conduct a compatibility test before full application. Do not dilute the product; it is ready to use as supplied. Avoid applying when the outside temperature is below 10°C (50°F) or if rain is expected.
Before use, shake the product well and apply generously using a brush or roller. A second coat is typically necessary and should be applied within one hour of the first coat. Allow 24 hours for the treatment to fully dry. Depending on surface porosity and temperature conditions, drying time is generally 4 to 6 hours. Ensure no pooling occurs on horizontal surfaces. Very porous surfaces may require an additional coat for enhanced water repellency.
Sandtex Brickwork Waterproofer & Protector is effective only on clean, unsealed masonry and should not be applied over painted or sealed surfaces. Blockwork with numerous cavities may not achieve complete waterproofing.
FAQ's
Q. How will Sandtex Brickwork Waterproof Protector affect the appearance of my brickwork?
A. Sandtex Brickwork Waterproof Protector enhances the natural colour and texture of brickwork, providing a subtle sheen and intensifying colours, thereby enhancing aesthetic appeal.
Q. Why choose Sandtex Brickwork Waterproof Protector?
A. Sandtex Brickwork Waterproof Protector offers long-lasting protection by forming a durable, flexible film that withstands weathering over time. It allows moisture vapour to escape from within the bricks, preventing damage such as spalling, while maintaining its effectiveness against water ingress. This breathability supports the overall health of masonry and reduces maintenance needs.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Sandtex Brick Waterproof Protector Clear - 5 L
Sandtex Brick Waterproof Protector Clear - 5 L
Information
This ready-to-use Brickwork Waterproofer and Protector, suitable for water-based applications, is designed to safeguard brickwork, render, pointing, and other porous surfaces. Brick and stone naturally absorb rainwater, which can lead to damage and crumbling in freezing conditions. This product dries quickly to create an invisible, water-repellent shield while still permitting surfaces to breathe. It is ideal for protecting pointing, render, stone, concrete, terracotta, and plaster surfaces.
- Preventing water damage to brickwork and stone
- Forming a water-repellent barrier
- Rapid drying time
- Allowing surfaces to breathe
Specifications
| Area | Exterior |
| Recommended Use | Brickwork, pointing, render, stone, concrete, terracotta, and plaster surfaces. |
| Base | Water-Based |
| Coverage | Up to 6m² per litre |
| Drying Time | 4-6 hours |
| Recommended Coats | 2 coats |
| Application Method | Brush or roller |
| Clean Up | Wash equipment with clean, cold water |
Preparation
Ensure all surfaces are thoroughly cleaned, dry, and free from any substances that could affect adhesion, such as loose or flaking material.
If there is any mould or fungal growth, treat the surface with a fungicidal wash and allow it to dry before applying the Brickwork Waterproofer & Protector. Repair any cracks or weak points in the pointing. Ideally, clean masonry should be stripped back to bare brick, mortar, or render to maximise the effectiveness of the treatment.
Application
It is recommended to conduct a compatibility test before full application. Do not dilute the product; it is ready to use as supplied. Avoid applying when the outside temperature is below 10°C (50°F) or if rain is expected.
Before use, shake the product well and apply generously using a brush or roller. A second coat is typically necessary and should be applied within one hour of the first coat. Allow 24 hours for the treatment to fully dry. Depending on surface porosity and temperature conditions, drying time is generally 4 to 6 hours. Ensure no pooling occurs on horizontal surfaces. Very porous surfaces may require an additional coat for enhanced water repellency.
Sandtex Brickwork Waterproofer & Protector is effective only on clean, unsealed masonry and should not be applied over painted or sealed surfaces. Blockwork with numerous cavities may not achieve complete waterproofing.
FAQ's
Q. How will Sandtex Brickwork Waterproof Protector affect the appearance of my brickwork?
A. Sandtex Brickwork Waterproof Protector enhances the natural colour and texture of brickwork, providing a subtle sheen and intensifying colours, thereby enhancing aesthetic appeal.
Q. Why choose Sandtex Brickwork Waterproof Protector?
A. Sandtex Brickwork Waterproof Protector offers long-lasting protection by forming a durable, flexible film that withstands weathering over time. It allows moisture vapour to escape from within the bricks, preventing damage such as spalling, while maintaining its effectiveness against water ingress. This breathability supports the overall health of masonry and reduces maintenance needs.
Original: $37.34
-65%$37.34
$13.07Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Information
This ready-to-use Brickwork Waterproofer and Protector, suitable for water-based applications, is designed to safeguard brickwork, render, pointing, and other porous surfaces. Brick and stone naturally absorb rainwater, which can lead to damage and crumbling in freezing conditions. This product dries quickly to create an invisible, water-repellent shield while still permitting surfaces to breathe. It is ideal for protecting pointing, render, stone, concrete, terracotta, and plaster surfaces.
- Preventing water damage to brickwork and stone
- Forming a water-repellent barrier
- Rapid drying time
- Allowing surfaces to breathe
Specifications
| Area | Exterior |
| Recommended Use | Brickwork, pointing, render, stone, concrete, terracotta, and plaster surfaces. |
| Base | Water-Based |
| Coverage | Up to 6m² per litre |
| Drying Time | 4-6 hours |
| Recommended Coats | 2 coats |
| Application Method | Brush or roller |
| Clean Up | Wash equipment with clean, cold water |
Preparation
Ensure all surfaces are thoroughly cleaned, dry, and free from any substances that could affect adhesion, such as loose or flaking material.
If there is any mould or fungal growth, treat the surface with a fungicidal wash and allow it to dry before applying the Brickwork Waterproofer & Protector. Repair any cracks or weak points in the pointing. Ideally, clean masonry should be stripped back to bare brick, mortar, or render to maximise the effectiveness of the treatment.
Application
It is recommended to conduct a compatibility test before full application. Do not dilute the product; it is ready to use as supplied. Avoid applying when the outside temperature is below 10°C (50°F) or if rain is expected.
Before use, shake the product well and apply generously using a brush or roller. A second coat is typically necessary and should be applied within one hour of the first coat. Allow 24 hours for the treatment to fully dry. Depending on surface porosity and temperature conditions, drying time is generally 4 to 6 hours. Ensure no pooling occurs on horizontal surfaces. Very porous surfaces may require an additional coat for enhanced water repellency.
Sandtex Brickwork Waterproofer & Protector is effective only on clean, unsealed masonry and should not be applied over painted or sealed surfaces. Blockwork with numerous cavities may not achieve complete waterproofing.
FAQ's
Q. How will Sandtex Brickwork Waterproof Protector affect the appearance of my brickwork?
A. Sandtex Brickwork Waterproof Protector enhances the natural colour and texture of brickwork, providing a subtle sheen and intensifying colours, thereby enhancing aesthetic appeal.
Q. Why choose Sandtex Brickwork Waterproof Protector?
A. Sandtex Brickwork Waterproof Protector offers long-lasting protection by forming a durable, flexible film that withstands weathering over time. It allows moisture vapour to escape from within the bricks, preventing damage such as spalling, while maintaining its effectiveness against water ingress. This breathability supports the overall health of masonry and reduces maintenance needs.
